Fandom

Soap Bubble Wiki

Baby Pool Moat How-To

221pages on
this wiki
Add New Page
Comments0 Share

Ofer's Baby Pool MoatEdit

2013-05-26 09.02.21

finished baby pool moat

 
I wanted a moat that was inflatable so it wouldn't take too much space. A baby swimming pool is fine but it needs a lot of juice, so I came up with this.
 

Here is the process step by step.

2013-05-26 08.56.23

The pools

Buy a large pool and a smaller one,the big one I used is 1.12m (44") in diameter.
 
2013-05-26 08.58.29

cut top ring

The top ring is obsolete and can even interfere so I cut it off. (Make sure the rings are not interconnected and each has a separate valve.)
 
2013-05-26 09.23.50

draw circle

Draw the outline of the inner pool, it makes it easier to apply the glue.
 
2013-05-26 21.41.10

adhesive

I used all-purpose cement but you can use Vinyl glue which is designated for inflatables. However since it's more expensive and durability is not an issue I went for the less expensive glue.
 

Apply glue on both sides and let dry for 10 min.

2013-05-26 09.30.36

apply glue

2013-05-26 09.26.17
 

Place the inner pool in the marked circle, start from the middle and push outward so no air is trapped in between.

2013-05-26 09.37.16

added glue

I applied some more glue just for good measure, and voila, you've got yourself an inflatable moat. The kid can stand inside the inner empty pool
 

--Author: Oferfal

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.