FANDOM


This is a simple method that turns an ordinary kitchen strainers into "super hoops".

Strainer DSC04711

An ordinary plastic kitchen strainer.

DSC04714

With a hacksaw, cut off the 2 ears at the top of the strainer

 
DSC04717

With a utility knife, trim off the mesh

DSC04718

Now, you are ready to move on to the next step. I keep the mesh for other possible uses.

 
12194574 894778647257224 3236047016173545677 o

Using a common hacksaw or coping saw, cut notches into the front and back edges of the rim as shown.

12185176 894778683923887 5219073510304189291 o

...top and bottom.

 
12194574 894778723923883 1850715766668365404 o

The notches provide crannies for bubble juice and will result in 4 times the bubbles of a notchless hoop.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.