by Daniel Dyboski-Bryant
See also: Modifying 3_different types of E-Cigs
- 1 x EVO-D e-cigarette or other similar e-cig. These are can be found on the internet quite inexpensively
- 2 x thin clear plastic tubing (hardware shop)
- 2 x long thin balloons (rolled up)
Total price £8 (E-cig) plus £1(other parts. Assembly time - 10 minutes
Here's an example of the balloon I used.
I drilled the air inlet hole bigger. This makes blowing smoke a little faster and gives more control.
Make sure that the blow tube is long enough to reach a little past this hole. The sleeve will let air find its way into this hole - unless your sleeve is covering it!
I drew a black spot onto the sleeve where the button is, because it can be hard to see when it's covered by the sleeve.
Push one tube over mouthpiece. This will be the fogger's outlet.
Snip the closed end of the balloons and roll them up. I used a drum stick to help the rolling process.
Roll both balloon donuts onto the second tube which will be the tube that you blow into. Make sure that the donuts will unroll in the correct direction.