• 2

    Holes 1/2" apart.


    This design creates 52 loops


    With a "V" cutout at the handle you eliminate any soap film in the center of the strainer after dipping

  • 1.  Any size plastic kitchen strainer (7 1/2 diamter pictured here)
  • 2. 5mm diamter very sturdy hollow plastic straws (these are the kind that helium balloons are attached to).
  • 3.  8-shaped bubble sticks with the 8-shape snipped off (available only in bulk online thru Alibaba to my knowledge)

Using and ordinary 7 1/2" plastic kitchen strainer you can create a multi loop wand with 52 loops.  Remove the "ears" and the mesh from the strainer so you can get started. The holes are drilled (using a 13/64" drill bit) 1/2" apart.  This size hole makes for a tight fit for the straw to fit thru.  When you are drilling the holes make sure your drill bit is pointed at the center of the strainer so your loops are all evenly and uniformly spaced.

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.