FANDOM


Several years ago, Wayne Schmidt engaged in some extensive explorations of bubble juice recipes and tri-string wicks. This page provides the recipe and wick that that Wayne found worked best for him.

How To Blow Giant Bubbles Part 302:32

How To Blow Giant Bubbles Part 3

Wayne's page about his explorations is highly recommended. It provides a great perspective on the ins-and-outs of bubble testing and he has some great helpful hints.
 


See Wayne's page Monster Soap Bubbles



Wayne's Preferred RecipeEdit

After his extensive testing, Wayne wrote: "Here's the best bubble solution I found for making giant soap bubbles. Please note that the mixing method is almost as important as the ingredients." He expresses the belief that the method of combining the ingredients is as important as the ingredient amounts themselves.

  1. Using a scale, measure out 92 grams of Dawn Pure Essentials Hypoallergenic dish soap in a mixing container. Add the 1/2 compressed teaspoon of J-Lube** and stir in by hand using a beater from an electric mixer. J-lube mixes very quickly in pure dish soap. It doesn't clump as it will if added to water. (I found Dawn Hypoallergenic dish soap works better than Dawn Pot and Pan. It's inexpensive and available at Walmart.)
  2. Add 40 grams of Surgilube and stir it in using the same beater.
  3. Pour in 1793 grams of room temperature tap water.
  4. In a small cup, measure out 100 grams of tap water and mix 1 compressed teaspoon of baking powder into it. Add this to the main solution.
  5. Place the beater used for hand mixing in the electric mixer and mix the solution on medium high (5 on the 7 increment scale on my 220 watt mixer) for 90 seconds. I use the same beater for hand mixing and electric mixing because I want to avoid loosing even the smallest amount of the concentrated J-lube/soap solution. For the same reason I only use one container to mix in. Employing several invariably results in some of the J-lubed solution being left behind. Because it's so powerful, even small loses can affect results. The one exception is the water-baking powder solution. It's so thin all of it comes out of its container without loss. When using the electric mixer, be sure all of the beater's heads are below the solution's surface or it'll whip up a lot of foam.
  6. Cover and let rest overnight before use.
    • J-Lube amount: Edward suspects that you can use 1/4 of this amount if you have full-potency J-Lube. The amount being used is the equivalent of 1 tsp (about 3.5-4 grams) of J-Lube for a gallon of water. Usually 1 gram per gallon is a healthy dose. If your juice ends up being very stringy, try using 1/2 or 1/4 of the amount called for. See PEO Shelf-Life and Degradation.

NOTES FROM EDWARD (July 2017): Dawn Pure Essentials Hypoallergenic dish soap seems to have been discontinued. Try substituting Dawn Professional (either version) or another recommended Dawn.

Wayne's Preferred WickEdit

Wayne uses two strands of deconstructed RubberMaid Finish Mop Yarn for the bottom string and four green strands from a deconstructed Rubbermaid Web Foot Microfiber mop head. Wayne writes:

Before assembling the tri-string wick, wash the mop head before taking it apart in hot water but no laundry detergent. Laundry detergent has anti-foaming agents that might linger in the mop yarn and hinder bubble formation.

Two lightly twisted strands of Rubbermaid #24 Finish Mop yarn for the bottom string.

Four of the fuzzy green strands from a Rubbermaid Web Foot Microfiber mop head very loosely braided together.

While I've made tri-string wands up to 12 feet on a side, the best performance seems to come one that's 6 feet on a side. It's easier to use and produces longer bubbles, though admittedly not as big in diameter.


Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.